- Optomechanics
- Precision Optics
- Singlets
- LINOS Achromats & Lens Systems
- LINOS Laseroptics & Lenses
- LINOS Machine Vision Solutions
- Micro Imaging
- Polarization Optics
- Mirrors
- LINOS Thin Film Coatings
- LINOS Faraday Isolators
- LINOS Laser Modulators & Pockels Cells
- Prisms
- Spectral & Neutral Filters
- Beamsplitters
- Optical Windows & Diffusers
- Optics Software
- Lightsources & Laser
- New Products
Technical information Beam Expander
LINOS beam expanders are optical systems for beam forming used in laser material processing. They can vary the diameter and the divergence of a laser beam and allow optimization of focus diameter, focus position and beam propagation.
Qioptiq offers standard versions of manual and motorized variable beam expanders made of fused silica and/or optical glass. LINOS Beam Expanders are optimally employed in conjunction with LINOS F-Theta-Ronar lenses for applications including:
• Laser structuring of foils
• Laser scribing of ceramic substrates
• Cutting of solar cells
• Micro drilling of sheet metal
• Marking of diverse materials with encodings
All LINOS beam expanders can also be implemented in reverse mode as beam reducers.
Manual version
Continuous magnification between 2x and 8x are available. In addition Qioptiq offers manual variable beam expanders with fused-silica entrance lenses for higher laser resistance.
The back focal length of F-Theta-Ronar or Focus- Ronar lenses can be modified by changing the divergence of the incoming laser beam. Fine focusing of the beam expander compensates the focal length tolerances of other optical components as well as divergence of the laser source.
Handling
Zoom and focusing scales of the LINOS manual beam expanders are set according to product specific graphs. The expansion factor is adjusted by turning the focusing ring and zoom ring. To focus the beam expansion, only the focusing ring should be adjusted.
The beam expander is mounted on surface A. Please Take care that the laser beam is centered on the entrance lens and parallel to the optical axis of the beam expander (x/y tilt adjustment).
Beam expander with a variable expansion factor 2x to 8x for 1064 nm.
Motorized version
The motorized beam expanders of second generation are precise and easy to integrate. They are used in automatic production processes or in application laboratories. The controller is integrated into the beam expander.
For high-power or short-pulse laser applications full fused-silica designs are available with excellent transmission and thermal resistance performance. The special coating with low absorption and high transmission for these fused-silica beam expanders covers for the continuous variable magnification 1x ...4x and 2x ...8x the complete wavelength ranges of 340-360 nm, 515-540 nm and 1030-1080 nm.
The customer can select between two electrical interfaces (SubD9/ RS232 or Phoenix Contact/RS232).
Software
The Windows™-based software developed with LabView allows an easy
control of the motorized beam expander. After initialization, the
desired expansion is achieved by moving the two independent stepper
motors. The lens positions for the magnification ranges of 1x-4x or 2x-8x are
listed for each motorized beam expander type in provided tables. Ten
individual pre-sets can be stored.
The beam expander can also be directly controlled under other operating
systems via the serial interface (e.g. terminal program). All serial
interface commands are listed in the manual.